Handmade solid oak peg rail. For durability and beauty you can't beat oak! The peg rails are built to last and will withstand daily use and hold anything from a winter coat in the hallway to a heavy saucepan in the kitchen. This peg rail can be made long enough for 3 to 22 pegs.
The pegboard and pegs are made from solid oak. They are finished with a clear wax to keep them clean and bring out the beauty of the grain.
If you want to paint or stain them I can also supply them unwaxed.
As a guide, I usually leave two inches at each end, then space the pegs at 4 inch intervals.
So a 3 peg rail would be 12 inches long, 4 pegs 16 inches, 5 pegs 20 inches (multiply the number of pegs by 4 to give you the total length)
Every peg rail is custom made to order, so if you have a specific space you need to fit the rail into, I can space the desired number of pegs across that length.
The length of the pegs are 2.8 inches (75mm) from the front face of the board, but can be made longer or shorter by request. The board is 95mm (3.7") wide and 20mm (0.7") thick.
They come with countersunk holes for attaching to your wall. Rawl plugs and stainless steel screws are supplied.
PLEASE add your phone number in the order notes so I can give it to the delivery driver.
If you have any questions, let me know and I will advise the best option.