This is the basic Maidinthewoods preservation and casting kit that includes a free practice project or mold.
We also offer an 'add on' projects section that allows you to customize this basic kit with the jewelry projects and molds of your choice! This kit does not include molds or jewelry projects unless I happen to add molds as one of the surprise bonus items...❤ If you don't see the project you are looking for just let me know.
More links below!
PANDORA STYLE BEAD MOLD NOTE: Adding a Pandora style bead mold to your order is the mold only- The Pandora bead mold KIT includes the mold, 4 sets of grommets and epoxy glue.
Order Kit here: https://www.etsy.com/listing/640441969/pandora-resin-bead-mold-kit-add-on-to?ref=related-2&frs=1
Maidinthewoods Tree of Life wire-work must be ordered at Maidinthewoods.com to stay in compliance with etsy rules of selling. Breastmilk moons cannot be wrapped and shipped from etsy.
INSTRUCTIONS FOR ORDERING YOUR TREE OF LIFE WIREWORK SERVICE FOR YOUR KEEPSAKE MOON!
1.) Order the Preservation Kit with a 25mm or 30mm mold(s) from the molds listing and create your moon(s)
2.) Order the wirework of your choice from MAIDINTHEWOODS.COM - Link Below (Copper wire-work starts at $65.00)
https://www.maidinthewoods.com/product-page/maidinthewoods-keepsake-wirework
3.)You did it! Ship your amazing Keepsake moon creation along with your wire-work order number to Maidinthewoods. Contact me for address when you are ready to ship.
We will notify you when your moon arrives at Maidinthewoods. Current Average turnaround time is 4-6 weeks or less! May be longer during the Holiday season!
*You will also receive an invitation to join the Maidinthewoods Keepsake Kit Preservation Support Group on Facebook. We hope to see you there...:)
NEW...If you would like to watch doula and artisan ALLISON TOLMAN create her jewelry using this kit...check out her new You Tube video here!
https://youtu.be/WAj0Z1VoSQQ
The THE MAIDINTHEWOODS PRESERVATION KIT includes:
~1 Breastmilk Preservation packet (Another preservation powder can be added creating a "buddy kit" or to do two separate preservations. The preservation is ordered here:
https://www.etsy.com/listing/614426185/add-on-additional-breastmilk?ref=shop_home_active_20&frs=1 )
~Pearl and gold shimmer
~Opal flecks-(make a note at checkout if you are looking for other general colors of flecks or tints and we will add them to your kit! )
~High quality Jewelers resin, resin mixing and measuring supplies
~Easy to follow instructions
~A Bonus practice project!
💕All this is beautifully hand boxed for your gift giving pleasure!
JEWELRY 'ADD ON' PROJECTS MAKE IT EASY TO CREATE YOUR KEEPSAKE.
Add the 'add on' to your kit and receive all the supplies to make that item. The basic kit makes quite a few pieces so you can add several add on projects. see FAQ section below.
💕BEAD KITS:
Pandora Bead Kit (Includes 4 sets of silver plated grommets and epoxy glue for installation!):
https://www.etsy.com/listing/640441969/pandora-resin-bead-mold-kit-add-on-to?ref=related-2&frs=1
You can also choose the pandora style bead mold only.
💕EARRING KITS:
Gallery Style Earrings~
https://www.etsy.com/listing/667408604/keepsake-earring-add-on-kit-silver?ref=shop_home_active_1&frs=1
💕NECKLACE KITS:
Gallery Style Pendant~
https://www.etsy.com/listing/677882151/gallery-bezel-keepsake-silver-necklace?ref=shop_home_active_4&frs=1
Maidinthewoods Keepsake Jewelry Options- Including exclusive MIW Molds!
https://www.etsy.com/listing/642919495/new-faceted-diamond-shaped-breastmilk?ref=shop_home_active_18&frs=1
💕RING KITS:
Gallery Style Ring kit~
https://www.etsy.com/listing/677872089/gallery-bezel-keepsake-silver-ring-kit?ref=shop_home_active_5&frs=1
Simple solid silver ring~
https://www.etsy.com/listing/583657418/ring-with-matching-mold-for-keepsake?ref=shop_home_active_22&frs=1
⭐TIP:
Having more than one mold can be very beneficial. This kit includes enough resin to mix several small batches of resin. Once a batch of resin is mixed for casting it must be completed in the alloted working time. Often you will have some extra mixed resin after pouring your intended piece. The benefit of having extra molds on hand is that you will be able to create more items per resin batch with your kit. MORE JEWELRY!!! YAY!
💕ADDITIONAL MOLDS AVAILABLE HERE:
https://www.etsy.com/listing/597459237/diy-keepsake-moon-molds-for?ref=shop_home_active_1
⭐TIP: It's also a good idea if you are creating a matching jewelry set to pour all resin pieces at the same time...especially if using color shimmers, flecks and tints.
FAQ
💕How can I order more of this awesome resin if I need it for future projects?
You can order another kit resin here:
https://www.etsy.com/listing/804894035/extra-3-oz-resin-set?ref=shop_home_active_17&crt=1
💕Why do I need to order my TREE of LIFE wirework on the Maidinthewoods.com website?
~Our company strives to stay in compliance with ETSY rules of selling. Shipping items that include breastmilk or locks of hair is considered shipping human remains which is prohibited through the ETSY platform.
💕What metals do you offer at Maidinthewoods.com for the TREE of LIFE wrap and what is the cost?
The MAIDINTHEWOODS Wire-work is available in:
Solid Copper
Solid Silver
Rose Gold Filled
Gold Filled
Selecting a longer chain than 20" adds a small increase to the cost
💕Is frozen breastmilk ok to preserve into keepsake powder?
~YES! There is no problem with defrosting and using your previously frozen milk. It's a good idea to keep a few ounces of breastmilk for future keepsake creations in the back of your freezer!
💕How much Preserved Breastmilk powder may be used when casting my keepsake?
~Just a pinch is all you need. If you like a more solid look you can add a small amount of pearl shimmer which is included in your kit. Also... taking the time to crush your dry preserved breastmilk super fine helps with achieving a more opaque look. Less crushing is perfect for a granite stone look or for a universe effect. I made a blue green universe cabochon this way...lovely! Check it out on the MAIDINTHEWOODS facebook page!
💕How many items will the Maidinthewoods DIY Keepsake Preservation Kit create?
~This kit can create 4-6+ 30mm or 25mm Keepsake Moons or crystals depending on the amount of the finished Preserved Breastmilk powder used... or MANY smaller keepsake cabochons that may be used for rings, earrings and more! See links above for list of kits available to add onto your kit.
💕Do I need more than one preservation packet if I want to preserve and create for multiple children?
~If you want to make individual preserved powder for each child, you will need a packet for each preservation. We offer an extra preservation packet option that can be added to your kit Here:
https://www.etsy.com/listing/614426185/breastmilk-preservation-packet-contains?ref=shop_home_active_11&frs=1
You may also choose to add a small amount of several milks together and use just the one preservation packet if that is a acceptable option for you.
The extra preservation packet is also perfect if two mommas who would like to support each other in the creation process and save a little money. Adding an extra packet to the preservation kit creates a "buddy kit"...: ) A great way to enjoy creating with a friend and saving a little money at the same time!
💕Is this a difficult process?
NOPE! This is a very easy process.
In a nutshell... 5 ml of breastmilk is quickly preserved into a paste in a double boiler or something that works like a double boiler. I use a small stainless steel bowl over a pot of boiling water to heat the milk until it's steamy hot, then the BBH Preservation packet is added to the hot milk. The milk is stirred until it almost instantly forms a paste. After it reaches this stage it is spread thinly onto a small square of parchment. The powder is allowed to fully dry...12-48 hours depending on humidity and how thin you spread the paste. After it is ground into a fine powder with the back of a spoon. A small pinch of this preserved powder is then added to a small batch of resin and cast in the mold shape of your choice. The resin is cured for at least 12 hours and then it is ready to be unmolded and set into jewelry! Measuring and using resin is easy...but must be accurate.
💕What other materials do I need?
A double boiler and a stove for heating the milk, a spoon and a plate for crushing into a powder...a little parchment...all things you most likely have at home! I use a small stainless steel bowl over a pot of boiling water for a double boiler.
💕What if you don't carry the mold that I need for my project?
If you need a specific size mold for your intended project just let me know and I may have that mold in the shop ready to ship to you.
We always carry the perfect Keepsake Moon Molds for Maidinthewoods wire-wrapping.
For more images of finished wraps check out the Maidinthewoods Instagram page!
💕How long will it take to receive my kit?
The Breastmilk Preservation and Casting kit is shipped within 1-2days via 2-3 day USPS priority within the USA...USPS International First Class outside the USA. FREE PRIORITY SHIPPING included within the USA! IIf I'm away for a trip I will notify customers on in my shop update when shipping will resume!
💕Can I reuse my mold?
Absolutely...with proper care your mold will make many shiny resin cast pieces. I like to use CASTING CRAFT MOLD RELEASE AND CONDITIONER for easy cleaning, then dry the mold very gently with a lint free soft cotton cloth. Do not scratch a mold with a fingernail to remove hair or lint. That scratch will transfer to your future projects. If you see a piece of lint or hair simply tap with the tacky side of a piece of scotch tape to lift the item from the mold. This also works well with any cured resin stuck on your silicone mold. It will lift right up!
💕May I use memorial ashes or other keepsake items with this kit?
Yes, you may cast a memorial ash piece with this kit...however...you do not need the breastmilk preservation powder for an 'ashes only' memorial piece of jewelry. This link is for keepsake memorial creations:
https://www.etsy.com/listing/679488103/new-memorial-preservation-and-casting?ref=shop_home_active_3&frs=1
Umbilical stump, placenta powder, flowers, locks of hair or even fibers are all fine to include. Be sure that all items are "bone dry" water is the enemy of resin.
💕May I add a personalized message to a kit that is being gifted?
~Absolutely! Please add a note a checkout and I'll add a personalized message inside the cover of the kit...💞
Please let us know if you have any other questions for me regarding this item.
These kits have been a complete success and we are so happy to partner with creative DIY Moms and Dads as they create the perfect keepsake.
This kit features the 'The Breastmilk Queen' Preservation powder created by Amy in AU who has been a leader in the milk preservation and keepsake industry. It is lovingly assembled in Maidinthewoods style and makes a unique gift for any mother!
Have Fun
... and Create Something Beautiful!
~Doreen
Some Maidinthewoods Keepsake Preservation Kit Feedback!
5 out of 5 stars
Loved this kit! Has enough to do quite a bit of stones. I made about 5- 25mm cabochons, 1- 30mm, and 6 Pandora style beads before I ran out of the hardener. Beautifully packaged, and with detailed instructions which are simple to follow.
5 out of 5 stars
Easy to follow instructions for milk preservation. Doreen is very responsive and kind to questions! She has been the best shop I have ever dealt with on Etsy! I actually went to her website to order the matching necklace.
5 out of 5 stars
Long post alert!!! I would just like to say that anyone who is considering working with anyone to preserve their breast milk and turn it into something special this is the woman you go to! From day one Ms Doreen has been above and beyond amazing! She is so helpful and she truly loves her job! I couldn't imagine going to anyone else she has truly been there every single step of the way ensuring that I was happy things were done correctly and I was satisfied a hundred percent! I am so happy and so thankful for her! You would be absolutely crazy to go with someone else LOL I could not imagine doing this without you Miss Doreen! Thank you truly from the bottom of my heart💜💜💜
5 out of 5 stars
My husband bought this for me for my Birthday which isn't until June, but I know I will love it! Received it quickly-thanks!
***A Note from the amazing Amy McGlade AKA THE BREASTMILK QUEEN***
Creator of the preservation powder used in Maidinthewoods Preservation and Keepsake Kits!
Breastmilk Preserving Tips
Congratulations on purchasing a packet of my Milky Mama Magic Dust. This particular powder has been used to create over 12,000 pieces of breastmilk jewellery (Jewelry in US) since it was launched in 2014!! Isn't that AMAZING !!
I can personally guarantee that when you use this tried and true preservation to preserve your 5mls of breastmilk that your breastmilk will be transformed to a stable powder, suitable for infusing into resin. It will NOT turn black, rancid or moldy - yuck!!!
However, breastmilk is a living breathing fluid, with a complex structure unique only to you! That's what makes your breastmilk so special, no two samples will ever be the same.
Some slight oxidation of your preserved breastmilk, can and does occur over time. Remember your breastmilk is alive, it may change shades, but it will NEVER rot, go rancid or turn black!!
Tips for preserving breastmilk and caring for your piece!!!
• Go slow, do not burn your breastmilk. If you do it will darken and change the color of breastmilk over time. It will never go black moldy, but burnt milk is not pretty.
• Grind your breastmilk to a tiny fine powder to ensure it's dry! If you do not, you risk moisture being trapped in your sample.
• Follow your care instructions, do not expose your piece to water, moisture, heat, perfume, chemicals EVER. No exceptions.
• Embrace the fact that you are crafting with a living substance that you are capturing in a forever piece of jewellery
• Follow instructions included precisely
Safty data available upon request. non toxic and non chemical