Lustro Electro is a professional quality brightener tailored for use in a small tank.

We recommend using Lustro ElectroSuper Bright in Conjunction with Lustro Smooth-O Part B and our easy to follow electroform recipe also tailored for smaller tanks.

SHIPS ANYWHERE IN THE WORLD! A lot of my customers are in places that other suppliers won’t ship brightener to.


SEE BELOW FOR SOME HELPFUL VIDEOS and ELECTROFORM SOLUTION RECIPE

------------------------------------------------------------------------------------------------------------------------------------------------------------
SET INCLUDES:

LUSTRO ELECTRO SUPER BRIGHT. Part A- Red Label - Grain Refiner and brightener

LUSTRO SMOOTH-O Part B - Blue Label Carrier & Leveling agent. Lustro Smooth-O is similar to Part A , Base , or Leveling agents used with other brighteners.


------------------------------------------------------------------------------------------------------------------------------------------------------------

Electroform Solution RECIPE https://youtu.be/7_Fd0yG-F9k

Test Your Solution https://youtu.be/0fbeWsW6X4s

Filter Your Solution. https://youtu.be/rqsSgYipadA

Anode Selection https://youtu.be/4WYUR1sbKZ8

Anode Bag https://youtu.be/Oa1vc1rCJn0

Chloride Dosing https://youtu.be/jbRfg1fTyb8

FAQ About Lustro Electro Brightener

https://electrojewelerjordan.com/?page_id=696

Instagram

@electrojewelerjordan. - Jewelry
@lustroelectro - Electroform Tips and tutorials

YouTube Electrojeweler JOrdan

https://www.youtube.com/channel/UCzOmpfKTlYg4-XghqplaDuQ

------------------------------------------------------------------------------------------------------------------------------------------------------------
Preparation Of Brightener

Add 50ML heated ( hot but not nearly boiling) distilled water to bottle, replace cap, and shake well until all solids are dissolved.

FOR BEST RESULTS PLEASE DO NOT FILL BOTTLE ONLY ADD 50ML DISTILLED WATER.

Whole batch must be made at same time other wise it will not work properly.

Directions:

Start by Adding 10 drops per liter to copper based electroforming solution and then testing. The exact amount needed will be determined by your baths make up. Our customers have reported 10 - 15 drops per liter were used, start at 10 and work your way up. My baths use between 10-15 drops. Current setting can range from .1A per square inch - .3A per square inch depending of electroformed project and the composition of your bath. Start low and slowly increase current until bright and shiny surface develops.
Do not mix with other brighteners or leveling agents as they may not be compatible.
Top up with a few drops of brightener when needed.


------------------------------------------------------------------------------------------------------------------------------------------------------------
For this brightener to work properly chloride is needed in the bath, instructions here:

Chloride Dosing https://youtu.be/jbRfg1fTyb8

---------------------------------------------------------------------------------------------------------------------------------------------------
Lustro Smooth -0 Part B Leveling agent

• Long Lasting
• Large Size Treats up to 100 Liters
• Top Up as needed
• Fast copper deposition, use with higher current and cut plating times


LARGE

Preparation of Lustro Smooth-O LARGE SIZE
Preparation
Fill Bottle with heated (hot) distilled water to bottle, replace cap, and shake well until all solids are dissolved.
Whole batch must be made at same time otherwise it will not work properly.


Directions
• Add .5-2ml per liter
• Treats up to 100 liters
• Top Up when needed
• Less topping up than Lustro Electro Superbright

SMALL SIZE

Preparation of Lustro Smooth-O small SIZE
Preparation
Add 8ML heated (hot) distilled water to bottle, replace cap, and shake well until all solids are dissolved.
Whole batch must be made at same time otherwise it will not work properly.


Directions
• Add .5-2ml per liter
• Treats up to 20 liters
• Top Up when needed
• Less topping up than Lustro Electro Superbright


Check back as we will be adding many new and innovative products that Electro Jewelers need.


Follow us on Instagram for tips, tricks, jewelry making instruction and special offers:
https://www.instagram.com/lustroelectro/