Decent price, kept me updated with progress, well packed (and they chucked in some sweeties!) and good delivery. Great service overall.Read on Google
Behold, the Kolink Rocket Heavy has landed. Built to the same excellent standards as the Kolink Rocket, the Rocket Heavy packs in some serious hardware support, but remains just 15.8L in size. With space for a triple slot vertically mounted 340mm VGA card using the supplied mount & PCI-E riser cable, a 240mm radiator and SFX-L PSU's as standard, the Rocket Heavy is a small chassis with big features.
The Rocket Heavy has been designed to offer a small form factor chassis that still allows for an impressive setup. Both the vented front and top panel are made from aluminium, with an attractive hexagonal cutout design on the front, and a more traditional vented design on the top panel, where a 240mm radiator/AIO with up to 30mm thickness can be installed, alongside standard 120mm fans, using the handy radiator/fan bracket. A 120mm PWM fan is also included on the top panel as standard.
Aside from the pre-installed fan, users are also free to install another 120mm fan on the roof, along with a 120mm fan next to the motherboard mounts (a slim 120mm fan is recommended here if using a long graphics card). There is tempered glass on both sides of the case, showcasing your setup from most angles with style.
The interior is black powder coated as standard, and features enough room for an impressive setup despite only being 15.8L in size. There's room for a 340mm graphics card, which is mounted vertically, and can up to triple slot in thickness. The supplied GPU mount and 150mm PCI-E 3.1 Riser Cable allows you to mount your card quickly and efficiently, whilst connecting to your Mini-ITX motherboard is a breeze. CPU Coolers up to 85mm are supported although this case really lends itself to using an AIO setup.
In terms of PSU support, the Rocket Heavy supports SFX and SFX-L form factor power supplies as standard. Additionally, the I/O panel located at the front possesses a USB 3.2 Gen 2 Type-C port, two USB 3.0 Type-A ports as well as a pair of USB 2.0 ports.
New from the premier fan and cooling accessories manufacturer Alpenföhn. The Black Ridge CPU cooler is the perfect complement to small form factor (SFF) cases such as the recently refreshed DAN case. In fact, the Alpenföhn Black Ridge was made in association with Daniel Hansen, the designer of the famed DAN case. The decision to mount the fan below the heat sink has freed up significant space, yet without any compromise in cooling performance.
The Alpenföhn Black Ridge is ideal for small form factor cases or builds with micro-ATX or mini-ITX motherboards. The dimensions of the Black Ridge enable it to maintain a low enough profile to fit comfortably in SFF case and Alpenföhn’s high quality engineering means that the Black Ridge has excellent thermal performance.
Alpenföhn have further innovated by attaching a 92-millimeter fan to the base of a high quality heatsink and in so doing have cut the overall height of the cooler to just 47 millimetres. This extraordinary design also has the added benefit of reducing fan noise.
The Alpenföhn Black Ridge features a total of six copper heatpipes. Each are six millimetres thick and designed to transfer heat away from the copper baseplate. The heat is then dissipated across the heatsink's aluminium fins. These fins have a large surface area which aids in the cooling of your CPU.
The other benefit of this design is that RAM modules of up to 33 mm in height will not impede the cooler. Additionally if VLP-RAM (Very Low Profile) is used a 120 mm fan can be mounted to the cooler rather than the standard 92mm fan.
The Black Ridge's bundled 92 mm fan is capable of providing exceptionally cooling relative to its size. Spinning at up to 2800 RPM, it achieves an airflow of more than 80 m³h. This is more than enough to meet the performance needs of a 95 Watt TDP CPU and all the while generating a mere 37.6 dB(A).
The Alpenföhn Black Ridge is compatible with all current Intel and AMD sockets and it creates a lasting impression of uncompromising quality with a sleek black colour.
Add style to your cooling with the Kolink Umbra ARGB PWM fan
Armed with 12 LEDs on inside and 9 LEDs outside of the fan, the Kolink Umbra delivers jaw-dropping lighting displays along with impressive cooling performance. Courtesy of the 3-pin 5V header, this 120mm fan is compatible with software like Asus Aura Sync to provide optimal control over your ARGB displays.
Curved to further increase performance, the Kolink Umbra 120mm fan is capable of speeds of up to 1500 RPM, along with an airflow of 35CFM. What’s more, you’ll be able daisy-chain multiple units via this ARGB fan’s male and female PWM connectors. The daisy chain PWM connectors can also link up with adjustable speed controls. So, depending on the task at hand, you can adjust your fan speed to how you like.
In conjunction with its fantastic features, the Kolink Umbra has been designed and manufactured with premium components to make this fan last. An implemented hydraulic bearing not only bolsters fan life to 40,000 MTBF, but the reduced internal friction boosts overall performance as well. Furthermore, the Kolink Umbra’s anti-vibration pads ensure that even when you’ve adjusted the fan to top speed, you’ll enjoy a smooth and quiet operation; a sound level of just 17.8dB (A).
Product | 120mm White 9-Bladed ARGB PWM Fan |
Dimensions | 120mm x 120mm x 25mm |
Speed | 500 - 1500±10% RPM |
Airflow | 35CFM |
Static Pressure | 1.22mm H20 |
Connection Cable | PWM Female & Male 3-Pin 5V Female & Male |
Sound Level | 17.8dB (A) |
Bearing | Hydraulic |
MTBF | 40,000 Hour |
Product series | |
Product Series/Family | Rocket |
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.