With this wire wrap jewelry tutorial you will learn how to make ukulele wire wrap Pendant, as shown in the cover picture, without soldering and using only your hands and a few basic tools. As you can see this is ukulele and treble clef in one piece. Perfect gift for music lovers.
Tutorial complete with 50 color photos, detailed descriptions, graphic schemes. All what you need to finish this piece.
I attached extra file "finish_end" where I explain how to make nice and finish end for your spirals.
Please read files "finish_end" and "terminology" before you start to use my tutorial as this files have an explanation for some steps used in this tutorial.
Size:
Length: 50mm
Width: 20mm
Supplies you will need:
20 gauge dead soft wire - 35.5 cm
28 gauge dead soft wire - about 70 cm
30 gauge dead soft wire - about 40 cm
Tools:
Round nose pliers
Chain nose pliers
Flush wire cutters
Ruler
Permanent marker
Nylon piers
Optional tools:
Hammer
Steel block
Files, or sanding paper high grades
Polishing file ( you can use nail polishing file)
Skill level: Intermediate.
ATTENTION: If you have no experience with the wire, I have beginning lessons you can start your wire wrapping experience by trying this tutorial the result may not be the same as shown on this final piece.
COPYRIGHT & PERMISSIONS: WireUpGem images, diagrams and tutorials are all rights reserved.
* You may not copy or reproduce any format, written or photographic instruction, in whole or in part, presented by or attached to this tutorial.
* You may not use this tutorial material for any educational purposes.
* You may sell work derived from this tutorial in any number of copies and at any venue.
* You agree to assign all tutorial design credit to WireUpGem wherever you display, sell or discusses product made from this tutorial.
Thank you and happy wire wrapping!