While we do our best to show the most accurate color, there can be color differences from screen to screen. This is due to the fact that screens have different capabilities to display colors. We try to edit our photos to show the product colors as life-like as possible with color calibration software, but please understand the actual color may vary slightly from your screen. We cannot guarantee that the color you see accurately portrays the true color of the product. If color is a concern we recommend ordering a sample of the fabric. Samples can be ordered here: www.etsy.com/listing/238763837/

It is standard in the upholstery industry to NOT cut pillow covers perfectly square but to instead taper the corners. If you don't taper then there will be excess fabric in the corners of the cover which cause the fabric to flare out at the corners and do what the industry calls "dog ear". While it sounds odd, having the corners smaller than the middle results in a square looking pillow when stuffed. All of our pillow cover listings also include a picture of tapered vs non-tapered pillows.

Our pillow cover measurements are based on the widest portion in the middle of the cover, so the corners will measure less. This can cause some confusion as some customers think their cover was made too small if they just measure the corners.

In each pillow cover listing we include a recommended insert size chart. For a snug professional fit we recommend inserts that are 2" larger than the cover size if ordering a cover that is 18x18 or larger. For covers 17x17 or smaller we recommend an insert that is 1" larger.

To measure an insert or existing cover, you need to measure it seam-to-seam using soft tape. If you don't have soft tape you can use a string and then place that next to a ruler. Pillows are measured seam-to-seam not by their overall size when stuffed.

Our covers are designed for standard pillow inserts. If your insert has pleated corners then you would need a different style of pillow cover than we offer.

Pillows are measured seam-to-seam not by their overall size when stuffed. To find out the size of your existing pillow or insert you will need the seam-to-seam dimension. You can measure this by getting soft tape or string and putting it in the middle of the cover on one seam and pulling it over the pillow to the other seam -- making sure its not pulled too tight but that it rests evenly on the pillow. You need to make sure you measure the middle of the pillow and not the edges as the edges could be tapered which means they will measure less.

Once you have this dimension you can reference our Insert Size Chart (included in all pillow cover listings) to see what size cover or insert you need.

Custom Sizes are also available upon request